El contenido de esta página requiere una versión más reciente de Adobe Flash Player.

Obtener Adobe Flash Player
 
 
 
< back   
Special models adapted to the standards ANSI Z21.86-2004 and CSA 2.32-2004. (4th edition), ANSI Z21.86a-2005 Vented Gas-Fired Space Heating Appliances
 
Its sealed combustion chamber insures a safe performance by keeping separated the heated air from gases produced through combustion, which are expelled outside. Fresh air from outdoors feeds the combustion constantly.
All heaters are fitted with Safety Valve that shuts off the appliance gas supply in the event that the pilot burner goes off or a gas failure occurs.
 
Each heater is provided with a through-the-wall venting kit to simplify the installation of the venting system. The outer vent cap is made of aluminum to prevent corrosion. Its modern design suits any wall covering.
 
 
 
 
MODELS
 DVEL 8 DVEL 12 DVEL 20
Power input (Kcal/h)
 2000 2750 4250
Power input (KW) 2.32 3.20 4.94
Power input (Btu/h) 8000 11000 17000
Thermostat NO YES YES
Fuel Natural Gas or LPG / Propane
Shipping Weight
(Venting kit & carton included) 		12.1 kg.
15.4 lb.

14.0 kg.
26.7 lb.

 34.0 kg.
59.9 lb.
Cabinet Height 50.8 cm.
20 in 		50.8 cm.
20 in		 50.8 cm.
20 in
Cabinet Width 34.6 cm.
13-5/8 in		 44.1 cm.
17-3/8 in

69.5 cm.
27-3/8 in
Cabinet Depth 14.1 cm.
5-9/16 in		 14.8 cm.
5-13/16 in

16.6 cm.
6-9/16 in
Vent Opening Required 12.7 cm.
5 in 		15.2 cm.
6 in

17.8 cm.
7 in

The power inputs are based on the Gross Calorific Value (Hs) of the gas.
For instalation purposes it is necessary to consider the depth added by the hanging bracket - 2 1/32 - (5,2 cm).
To enable us to constantly improve quality, ESKABE reserves the right to change design specifications without notice.